Pick-up van

Fuso FUSO 9C18 Canter Alu Pritsche 5.5m Kran 3x hydr.

Fuso 9C18 with aluminum platform body, 5.5m. Loading crane behind the cab, delivery time approx. 4 months.
Platform body dimensions can still be modified, loading crane with 3 x hydraulic extensions and remote control.

- GSR equipment including reversing camera, lane keeping assist, etc.
- Cruise control
- Double passenger seat
- Climatronic
- Duonic (automatic)
- Wheelbase: 4.75m
- Optional trailer coupling 3500kg

Permissible total weight: 8550kg, derated to GG 7490kg, payload approx. 2855kg
(Total weight 8550kg possible without modification, then payload approx. 3915kg!)
- 1x tool box
- Rotating beacons, reversing camera, rear warning lights, optional

Aluminum platform body: 5500 x 2380 x 500
- Bottom frame anodized with 8 mounted tie-down points per side
- Floor recess 24 mm with Sieveck floor panels 24mm
- 13 aluminum cross members (80 mm) anodized
- 2 x aluminum auxiliary frames (130 mm, reinforced) anodized
- Front wall 800mm, incl. front wall supports
- Side walls 500mm, 5 hinges per side wall, removable
- Side boards made of 25 mm snap lock profiles
- Rear wall: height: 500 mm / foldable, 3 hinges
- STANCHIONS: fixed at the front, KTL coated, middle stanchions: foldable, K20, removable at the rear
Crodpjzv Nuaofx Ai Tsi

Folding loading crane 8m with 3 x hydraulic extensions mounted behind the cab
Loading crane Fassi F70B.1.24e
0711.400 FASSI loading crane F70B.1.24e e-dynamic
Design according to CE directive (EN 12999)
Base unit: F70B.1 e-dynamic
Slewing range 400°
All hydraulic cylinders double-acting
Piston rods hard chrome-plated
Single-knee lever system
Electronic overload protection device with FX500
Emergency stop and optical alarm (90% and 100%)
FASSI stability control FSC incl. LMB II
6 functions RCH or RCS radio remote control
(linear levers)
with display and XP system
Pressure relief and load holding valves
Control block with 5 control valves, operable from one side
Separate hydraulic tank (33 l) with filter, mounted on the crane base
Extendable on both sides, outrigger width 3.30m,
hydraulic
Outrigger support swiveling 45° and 180°
Standard color RAL 3020 traffic red - all cylinders painted black
Load hook and fastening brackets
Driving position: folded transversely to the direction of travel
Dead point above the outrigger beam
Observe on-board voltage: 12V
06.91 Fassi RCS radio mini - 6 linear levers
08.88 FASSI stability control FSC-M/1 » incl. LMB II
97.17 IE742 connection box
0711.01.12 special outrigger, outrigger width 4.95m »
extendable incl.
C.80.02.B dead point rotated by 180° (above the
pendulum beam)
96.A2 1 LED work spotlight on the pivot arm »
mounted
96.A7 LED for 2 support legs, not mounted » (crane)
96.03 Oil cooler type 60/12 max. 60l pump capacity
95.89 Additional charge for stainless steel screws and
stainless steel hose clamps
95.85 Additional charge for Dinitrol application (cavities)
04.T0.99 Zinc primer for F65B.0, F70B.0, » F65B.1,
F70B.1 1.00
Black parts with KTL coating
8888 Proportionate transport costs
08.32 Slewing valve / load holding valve
Slewing cylinder, for all cranes with rack and
pinion
9. Special outrigger, outrigger width 4.95m »
hydraulically extendable incl. FSC-P
0711.01.18 Special outrigger, outrigger width 4.95m »
hydraulically extendable incl.
FSC-P OPTIONAL POSITION FSC - P has various
working areas, whereby the monitoring of the
outrigger width is continuously detected and the
corresponding lifting capacity is released.
In confined spaces, corresponding loads can also be lifted even with th

A hirdetés automatikusan lett lefordítva. Fordítási hibák előfordulhatnak.