Milling Machining Centre - Universal

MATEC 30 HV

5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV
Year of manufacture: 06/2008

Range of components: Steel, cast and welded structures.
The large X-axis and the head, which can be swivelled through 105° in either
direction, are ideal for multi-sided machining of long profiles or shafts.

The machine can be inspected under power by appointment.
Condition: In working order / ready for use.

Operating hours ((September 7, 2026):
Control on: 76.085 h
Machine on: 62.198 h
Program run: 26.653 h

TECHNICAL SPECIFICATIONS
Travels:
- X-axis: 3.000 mm
- Y-axis: 800 mm
- Z-axis: 1.100 mm
- A-axis: +/- 105°
- B-axis: 360°

- 1-axis NC swivel head, swivels through +/- 105 degrees
- Speed range: 20 - 9.000 rpm
- Drive power of motor spindle increased: 30 kW
* Torque max.: 190 Nm
* Boring capacity in steel: ca. 60 mm
* Milling capacity: approx. 500 cm3
Bljdpfjzyy Rmex Ac Uop
* Thread cutting: M30

SPECIFICATIONS:
- CNC control system: HEIDENHAIN iTNC 530
- NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800
* Horizontal faceplate,diameter: 800 mm
* Direct measurement system for the NC rotary table
* Part accuracy: : +/- 12"
* Load capacity max.: 2,5 tons
* Tangential torque with clamping: max. 6.500 Nm,
incl. motor (AC) with integrated rotary measuring system,
hydraulic clamping and incl. additional CNC axis
- Clamping plate:
Width / length: 835 / 3.500 mm
Number of T-slots: 7
Slot width: 18-H8
- Amperemeter for the main spindle drive
- Tool magazine: 48 positions
- Additional tool magazine: 48 positions, including tool changer, specialised
software and control panel for loading tools whilst the machine is running in
automatic mode
- Working area:
* Rapid speed: 30 m/min
* Feed rate: 30.000 mm/min
- Spindle:
* Cone/tool holder: SK40, DIN 69871
* Rotational speed: 9.000 / 30 kW
- Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l)
- High coolant pressure at the external nozzles
High-pressure coolant pump, switchable via the M function in the parts
programme to the external nozzles on the headstock, 20 bar.
- Coolant supply flow monitor
- Compressed air through the tool
- Centralised oil lubrication
- Oil mist extraction system
- Direct measurement system: X, Y and Z axes
- 3D measuring probe, brand: RENISHAW RMP 60,
with radio signal transmission for control, including control software
- Tool breakage detection
- Tool length measurement
- Fully enclosed work area with a roof; a completely enclosed work area.
The loading doors are designed in such a way that loading by crane is
possible at any time whilst they are open.
- Safety fence fitted to the machine
- Stronger linear guides for the Y-axis = 800 mm
X = size 65, Y + Z = size 55
- Bellows with steel vanes
- Rinsing gun
- Electronic handwheel (portable), brand: HEIDENHAIN HR 410
- Chip conveyor
- Workstation lighting (2-light)
- Extraction system
- Safety/machine guard glasses are being replaced
- Compressed air refrigeration dryers
- Documentation
- CE marking

Special features:
- Zero-point clamping system
- Swiveling head
- The CNC rotary table, in combination with the swivel head, enables 5-sided
or 3D machining of workpieces

The sale does not include any clamping devices.

Without guarantee of completeness and correctness of the technical information
and the equipment. - Subject to prior sale -